When a fall occurs, the harness tenses up and the Fall Protection Device detects this tension.
This device is also responsible for sending the stop signal to the machinery in the plant, causing a quick halt in the functioning of the machine.
The device must be connected to the fixed mooring point, by means of the bearing swivel and the connector. Naturally, the fixed clamping point must be located above the user, in order for the force of gravity of the fall itself to cause the desired effect of generating the sudden tension in the harness. In addition, the connection must have a minimum static resistance of 12kN.
The shape and structure of the fixed clamping point should be sufficient to prevent the device’s automatic disconnection and slippage. The use of fixed mooring points marked and certified is recommended, according to the European standard EN795.
Fall protection device
Retractable steel cable
Easy to install.
Durable and robust system components.
Avoid false alarms.
Capacity of utilization in all kinds of hazardous areas.
Areas of application
Edge detection in pits.